It is recommended that you try the drop test in 3 positions, marker straight up, marker at left degree angel (approximately 10 o'clock) and marker at a right degree angle (approximately 2 o'clock) to ensure the sensor is working properly.
Routine 4 : Testing & Calibrating SENSI
To test the sensor
· While the Angel is in safe mode.
· From the Basic or Advanced menu select the Test option (and then press the bottom/green button). The message DROPB will appear on the LCD display.
· Drop a paintball into the feed tube so that it falls into the breech.
· When the paintball is detected the display will give the message PASS.
· Repeat this several times to ensure the SENSI is functioning correctly.
· Failure to obtain the PASS message can be an indication that the SENSI needs to
be replaced.
To calibrate the sensor
· Make the Angel live and fit a suitable functioning loader.
· Fire the Angel at a steady rate for 10 shots and it will automatically calibrate
· The marker ROF will be limited to 13bps for the first 10 shots when the marker is switch to live and SENSI activated.
It is recommended that you try the drop test in 3 positions, marker straight up, marker at left degree angel (approximately 10 o'clock) and marker at a right degree angle (approximately 2 o'clock) to ensure the sensor is working properly.
Watch calibration video
Table of Contents