This button will be used when switching between the modes of SENSI. When the marker is in live, pressing and releasing this button will
cycle between SENSI on and off.
Routine 3: Turning SENSI on/off
Switching SENSI On
Press the orange button on the rear of the grip frame until the LED on the rear
of the frame flashes Red.
Switching SENSI OFF
- Press the orange button on the rear of the grip frame until the LED on the
rear of the frame is constantly Red.
LED Indicator status on the rear of the frame
- Red Constantly On = Live Mode, SENSI Off
- Red Slowly Flashing = Live Mode, SENSI On
This button will be used when
switching between the modes of SENSI. When the marker is in live, pressing and
releasing this button will
cycle between SENSI on and off.
You'll most likely always want
SENSI on when operating the marker, make sure the light is blinking red
Unlike the IR3, there is no indicator of SENSI's status on the LCD display. The LED light will display the COPS status. Also, if you turn the marker off (from Safe) with SENSI on it will reboot with SENSI still on when the marker is toggled to Live. However, the Load Detection System (LDS) will need to recalibrated. See that section for more information.